A reliable solution for mounting a hydraulic pump directly to an engine flywheel. This rubber drive coupling uses four stepped-hole capscrews to fasten to the flywheel face and four capscrews into the hub coupling, giving you a compact, vibration-damping drive assembly without the need for an intermediate bell housing adapter.
The stepped holes are the practical advantage here: a single coupling accommodates variation in flywheel bolt circle diameters, simplifying installation across different engine makes and configurations.
The rubber element absorbs torsional shock and dampens drivetrain vibration, protecting both the pump and the engine from impact loading during start-up and operation. Available in four sizes to suit common pump shaft and flywheel combinations found in mobile plant, agricultural machinery, and hydraulic power units.
| Type | Bore (ID) |
| 22AS | 70mm |
| 28AS | 85mm |
| 50AS | 100mm |
| 140AS | 125mm |






