A leaking reduction box seal is one of the more common causes of final drive oil loss on excavators and tracked equipment. Left unchecked, it leads to premature wear and costly gearbox damage.
This replacement reduction box seal is designed for the planetary reduction gearbox on hydraulic travel motors — the final drive unit that takes high-speed motor rotation and converts it to the low-speed, high-torque output your tracks need.
Correct fitment matters here. The reduction box seal sits at the interface between the rotating hub and the fixed housing, holding the gear oil in and keeping contaminants out under the stresses of continuous operation.
Suitable for:
Hydraulic travel motor / final drive reduction boxes. Contact FPD with your machine make, model, and travel motor details to confirm the correct seal for your application.
| Seal Dimensions (mm) | Description |
| 105 x 135 x 18 | 2 Lip 2 spring |
| 108 x 140 x 14 | 2 Lip 1 spring w/return |
| 120 x 150 x 18 | 2 Lip + 1 felt Steel OD |
| 125 x 155 x 18 | 2 Lip 2 spring Steel OD |
| 160 x 195 x 21 | 2 Lip Steel OD |
| 180 x 210 x 16/18 | 2 Lip + felt Steel OD |
| 190 x 225 x 21 | 2 Lip 2 spring Steel OD |
| 195 x 235 x 25/26 | 2 Lip 2 spring Steel |
| 230 x 260 x 16/18 | 2 Lip 2 spring+ felt |






