A direct-drive rubber coupling designed to connect a hydraulic pump to an engine flywheel. Three cap screws fasten into the flywheel on one side; three into the pump hub on the other. The stepped holes allow both sets of fasteners to be installed from the same face, simplifying assembly and removal without having to separate the bell housing.
The rubber element absorbs torsional shock and vibration between the engine and pump, protecting both components and extending service life.
Available in six sizes to suit a range of SAE pump drive configurations.
| Type | ID |
| 4AS | 45mm |
| 8AS | 60mm |
| 12AS | 60mm |
| 16AS | 70mm |
| 25AS | 85mm |
| 90AS | 125mm |






