A direct-mount rubber coupling designed for attaching a hydraulic pump to an engine flywheel via a splined hub. Four parallel through-drilled holes allow fastening to the flywheel using dowel pins or capless screws, while four stepped holes on the opposing face accept capscrews for securing to the splined hub. This makes for a secure, positive connection on both sides without additional hardware or adapters.
The rubber element flexes under load to absorb torsional shock, damp vibration, and tolerate minor misalignment between the pump and engine, protecting both components and extending service life.
| Size | Inner Diameter |
| 22A | 70mm |
| 28A | 85mm |
| 50A | 100mm |
| 140A | 125mm |






